|
Technical Specifications of Vigor2700
|
| Hardware Interface |
ADSL |
AnnexA : 1-port ADSL2+, RJ-11 connector |
| AnnexB : 1-port ADSL2+, RJ-45 connector |
| LAN |
4-port 10/100 Base-Tx Switch, RJ-45 connectors |
| ADSL Compliance |
ADSL |
G.dmt ( G.992.1 ) |
| ANSI T1.413 Issue2 |
| ADSL2 |
G.dmt.bis ( G.992.3 ) |
| ADSL2+ ( G.992.5 ) |
| READSL |
| Up to 24Mbps downstream and 1Mbps upstream |
| ATM Protocol |
Multiple Protocol over AAL5 ( RFC 2684 ) |
| PPP over Ethernet and AAL5 ( RFC 2516,2364 ) |
| Up to 8 PVCs |
| PPPoE pass through from LAN / WLAN |
| Transparent Bridge for MPoA |
| Firewall Features |
IM/P2P Blocking |
| Multi-NAT, DMZ Host, Port-Redirect / Open Port |
| Rule-Based IP Packet Filtering |
| SPI ( Stateful Packet Inspection ) |
| DoS / DDoS protection |
| IP address Anti-Spoofing |
| E-mail alert and logging via syslog |
| VPN pass-through |
| QoS |
Class-based bandwidth guarantee by user-defined traffic categories |
| Support of four priority levels |
| Support of DiffServ codepoint classifying |
| Virtual Private Network |
Up to 2 VPN tunnels |
| DHCP over IPSec |
| Protocol |
PPTP |
| IPSec |
| L2TP |
| L2TP over IPSec |
| Encryption |
AES |
| MPPE |
| DES / 3DES |
| Authentication |
MD5 |
| SHA-1 |
| IKE authentication |
Pre-shared key |
| Digital signature ( X.509 ) |
| LAN to LAN and Teleworker to LAN |
| Dead Peer detection |
| IPSec NAT-Traversal ( NAT-T ) |
| Network Features |
DHCP client / relay / server |
| Dynamic DNS |
| SNTP client |
| Call scheduling |
| RADIUS client |
| DNS cache / proxy |
| UPnP |
| Port-based VLAN |
| IGMPv2 proxy / snooping |
| Routing Support |
RIPv2 |
| Static Route |
| Content Filtering |
URL key word blocking |
| Java applet , cookies , Active X , compressed , executable , multimedia file blocking |
| Time schedule control |
| Web Content Filter by SurfControl |
| Management |
Web-based user interface ( HTTP / HTTPS ) |
| Quick Start Wizard |
| CLI ( Command Line Interface, Telnet / SSH* ) |
| Administration access control |
| Configuration backup / restore |
| Build-in diagnostic function |
| Firmware upgrade via TFTP / FTP |
| Syslog |
| SNMP management MIB-II |
| Max. Power |
10 Watt |
| Dimension |
L220 * W160 * H36 ( mm ) |
| Power |
DC 12V ~ 15V |
